+86-571-82666580, +91 11 22593098, 22248828, 22247973
Characterustic:
Makes Leak-Proof Gaskets Instantly
Resists Temperatures up to 500°F (260°C)
Resists Cracking, Shrinking, and Migration Caused By Thermal
Cycling
Seals Timing Chain Covers, Water Pumps, Valve Covers, Etc.
Fast Curing, Remains Flexible
Resists Oil, Water, Antifreeze, and Transmission Fluid
Application:
Clean all surfaces thoroughly. Remove old gaskets and prepare
flange surfaces. Dry and remove oil and grease. Remove cap,
puncture inner seal, screw on nozzle and cut to desired size. Apply
continuous, uniform beads around perimeter of one surface.
Completely surround all bolt holes. Wait 10 minutes for Silicone to
skin over”. Reassemble parts.
Note:
Leave thickness for Gasket when reassembling. Do not over-tighten
bolts. Silicone dries to touch in 1 hour. Allow 24 hours to fully
cure and bond. Replace the cap after use.
Acetic Acid is formed upon contact with water or humid air. Provide
adequate ventilation to control exposure.
Special Properties:
May be applied overhead or on sidewall joints. Will not sag or
run-off.
Packaging/Storage:
- 3-ounce (85 g) Carded Tubes / 12 per Case
- **New Size 1.5-ounce (42.5 g) Carded Tubes / 12 per Case
- No Special Handling Precautions
- Storage: Keep Container Closed
Store Away From Water or Moisture
Technical Data:
| Physical Form | Paste (Blue, Black, or Clear) |
| Odor | Acetic Acid Odor / Oxime |
| Specific Gravity @25°C | 1.03 1.38 |
| Solubility in Water | < 0.1 |
| Boiling Point | N/A |
| Chemical Stability | Stable |
| Flash Point | N/A Solid |
| Ignitable | N/A |
| Corrosive | N/A |
| Reactive | N/A |
| Extension Rate: | (3.18 mm orifice) 400 Gl min |
| Tack Free Time: | 256 (77 F) 10-20 minutes |
| Cure Time: | 25C (77 F) 24 hours |
See more products from this supplier.
Do you want to show products of your own company? Join FREE now!
